We are Building Cleaning Experts!
Industrial dry ice blasting services to clean ceilings, walls and anything attached to them without water, moisture, secondary blasting media, or chemicals.
- More than 15 dry ice blasting systems
- Over 25 years in business
- Second-generation family company
Indigo Is Here to Keep Your Rehab Project Moving
Dirt, combustible dust, loose paint, oils, grease, and other contaminants build up on ceiling trusses, rafters, beams, and roof decking, as well as on steel and masonry walls. Indigo cleans these structural surfaces without adding water or secondary blasting media. From a few thousand square feet of historic brick to a full 225,000-square-foot industrial building reconditioning, we have the scale and experience to handle your rehabilitation cleaning project.
Reason #1Experience and Capacity
Indigo has more than 15 dry ice blasting systems, we can bring all those systems to bear on a single project to move very quickly when time is of the essence. We have done close to 1,000,000 square feet of building projects over the last decade plus, so we have the experience to run the job quickly, safely and effectively.
- Reason #2
Cleans without water or secondary blast media for faster, easier cleanup
Water can damage the lights and electrical system in rehab building project. Dry ice sublimates completely upon impact, leaving behind no secondary abrasive media or moisture, which makes cleanup time.
- Reason #3
Excellent Cleaning and Paint Prep
By removing the buildup, it leaves walls, ceilings, and structural components ready for painting, inspections, or subsequent rehab work.
What we specialize in
Indigo's Building Rehab Cleaning Specialties
Ceiling
Trusses, beams, rafters, and decking
- Paint Prep
- Combustible Dust
- General Cleaning
Walls
Brick, block, cement and steel
- Paint Prep
- Mortar
- Old lath
- General Cleaning
Exhaust Fans and Ductwork
- Wall and Ceiling Fans
- Ductwork
- Equipment exhaust stacks
Electrical Systems
Bus ducts, panels, lights, junction boxes
- Cleaning
Built In Systems
Chain drives, conveyors, floor trolleys
- Cleaning
- Maintenance
What Indigo can do
Building surface cleaning project
120,000 sq. ft. facility rehabilitation
Indigo was contracted to perform deep surface cleaning on a 120,000-square-foot section of a 1,000,000-square-foot active industrial facility. Because production work continued uninterrupted in surrounding areas, precision and tight coordination were critical. The primary objective was to clean the 50-year-old ceiling system and masonry walls to prep them for repainting by a third-party contractor.
- 120,000Square feet cleaned
- 1,000,000Square-foot active plant
- 4Systems at once
- 2 weeksProject deadline
Beams, trusses & overhead steel 
Facility interiors 
Warehouse & racking areas
Stock reference photos for illustration only—not Indigo job photos or claimed customer work.
How this project was run
Facility Profile
50+ year-old structure featuring complex steel beams, rafters, trusses, Tectum roof decking, concrete block walls, and dense overhead utility infrastructure.
- Electrical bus ducts
- Water
- Compressed air
- Natural gas
- Fire sprinklers
- Nitrogen
- Oxygen piping
Deployment
Operations utilized multiple scissor lifts powered by four simultaneous dry ice blasting systems connected directly to the facility's compressed air lines.
Grid-Based Workflow
The workspace was systematically divided into structured sections defined by support columns and walls. Crews worked methodically from south to north in a single direction to prevent any re-contamination of cleaned areas.
Team Structure
Each area was assigned a dedicated two-man crew—one operator in the lift and one ground crew member managing media filling and equipment safety. Team members rotated regularly to maintain peak efficiency.
Containment
Where required, heavy-duty plastic sheeting was hung from the structural beams to the floor and sealed together to isolate the active work zone and protect surrounding production environments from airborne dust and debris.
Cross-Trade Integration
Indigo coordinated daily work schedules closely with external electrical, plumbing, concrete, and carpentry contractors to ensure the entire facility rehab stayed completely on track.
Flexible Scheduling
By utilizing weekend shifts and targeted overtime, Indigo met the strict two-week project deadline without disrupting ongoing facility operations or holding up follow-on trades.
How a facility quote works
Getting your project quoted
Share the area, residue, and project timing. Indigo returns a clear written quote for the cleaning scope only.
- 1
Step 1
Understand the job
We start with a phone conversation, photos, or an on-site walkthrough to learn what your needs or problems are.
Smaller projects may only need photos and a short discussion for an initial budget quote.
- 2
Step 2
Plan the cleaning approach
We outline a cleaning approach, access needs, and timing options that fit your maintenance window.
- 3
Step 3
Send a service quote
You receive a clear written quote to review with maintenance and purchasing before deciding to move forward.
Ready to talk about your project?
Call us today!
Indigo provides industrial dry ice blasting services. We do not offer automotive detailing or one-off personal vehicle cleaning.